Configuring Address Allocation Mode For Interface Address Pool - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
No.
1
2
3
4
5
3.4.2 Configuring Address Allocation Mode for Interface Address
Pool
According to the requirements of clients, you can select the static binding mode or the dynamic
allocation mode for address allocation, but you cannot enable the two modes in the same IP
address.
Context
The interface address pool takes precedence over the global address pool.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dhcp enable
The DHCP function is enabled.
Step 3 Run:
interface vlanif vlan-id
The VLANIF interface view is displayed.
Step 4 Run:
ip address ip-address { mask | mask-length }
An IP address is allocated to the VLANIF interface.
Step 5 Run:
dhcp select interface
The S9300&S9300E is configured to use the interface address pool.
Issue 01 (2012-03-15)
Data
Number of the VLANIF interface configured with an address pool, IP address range,
IP address lease, IP addresses not to be allocated in the IP address pool (optional),
and IP address and MAC address that need to be statically bound (optional)
(Optional) Egress gateway of the DHCP clients
(Optional) IP address of the DNS server and domain name of the DHCP clients
(Optional) IP address of the NetBIOS server and NetBIOS node type of the DHCP
clients
(Optional) Code of the customized DHCP option and corresponding ASCII character
string, hexadecimal numeral, or IP address
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 DHCP Configuration
59