Huawei S9300 Configuration Manual page 224

Terabit routing switch
Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
# On the ISATAP device, ping the global unicast IP address of the tunnel interface on the
ISATAP host.
[Quidway] ping ipv6 2001::5efe:2.1.1.2
PING 2001::5efe:2.1.1.2 : 56
--- 2001::5efe:2.1.1.2 ping statistics ---
# On the ISATAP host, ping the global unicast IP address of the ISATAP device.
C:\> ping6 2001::5efe:2.1.1.1
Pinging 2001::5efe:2.1.1.1
from 2001::5efe:2.1.1.2 with 32 bytes of data:
Reply from 2001::5efe:2.1.1.1: bytes=32 time=1ms
Reply from 2001::5efe:2.1.1.1: bytes=32 time=1ms
Reply from 2001::5efe:2.1.1.1: bytes=32 time=1ms
Reply from 2001::5efe:2.1.1.1: bytes=32 time=1ms
Ping statistics for 2001::5efe:2.1.1.1:
Approximate round trip times in milli-seconds:
# The ISATAP host can ping through the IPv6 host.
C:\> ping6 3001::2
Pinging 3001::2 with 32 bytes of data:
Reply from 3001::2: time<1ms
Reply from 3001::2: time<1ms
Reply from 3001::2: time<1ms
Reply from 3001::2: time<1ms
Ping statistics for 3001::2:
Approximate round trip times in milli-seconds:
----End
Configuration Files
The configuration file of the ISATAP device is as follows:
#
sysname Quidway
#
vlan batch 100 200
#
ipv6
#
interface Vlanif100
Issue 01 (2012-03-15)
Reply from 2001::5EFE:201:102
bytes=56 Sequence=1 hop limit=64
Reply from 2001::5EFE:201:102
bytes=56 Sequence=2 hop limit=64
Reply from 2001::5EFE:201:102
bytes=56 Sequence=3 hop limit=64
Reply from 2001::5EFE:201:102
bytes=56 Sequence=4 hop limit=64
Reply from 2001::5EFE:201:102
bytes=56 Sequence=5 hop limit=64
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/2/4 ms
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Minimum = 1ms, Maximum = 1ms, Average = 1ms
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 IPv6 over IPv4 Tunnel Configuration
data bytes, press CTRL_C to break
time = 4 ms
time = 3 ms
time = 2 ms
time = 2 ms
time = 2 ms
213

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents