Example For Configuring Ip Session - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Procedure
l
----End

4.4 Example for Configuring IP Session

This section provides an example for configuring the IP Session function.
4.4.1 Example for Configuring IP Session
This section provides a configuration example of IP session.
Networking Requirements
As shown in
to GE 1/0/2.100 of the Switch.
You need to configure IP session on the Switch so that STB-A and STB-B users can be online
once they power on STB-A and STB-B.
Figure 4-2 Networking diagram of IPTV
Configuration Roadmap
The configuration roadmap is as follows:
Issue 01 (2012-03-15)
Run the display session-interface [ interface-type interface-number ] command to check
information about the sub-interface enabled with IP session.
Figure 4-2, STB-A is connected to GE 1/0/1.100 of the Switch; STB-B is connected
Router
Radius server
Swtich
GE1/0/1.100
STB-A
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
DHCP server
10.10.10.10
Multicast server
Loopback0
20.20.20.20/32
GE1/0/2.100
STB-B
4 IP Session Configuration
97