Configuring Tcp6; Establishing The Configuration Task; Configuring Tcp6 Timers - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service

9.5 Configuring TCP6

By setting TCP6 packets, you can improve the performance of the network.

9.5.1 Establishing the Configuration Task

This section describes the applicable environment, pre-configuration tasks, data preparation, and
configuration procedure for configuring TCP6.
Applicable Environment
To optimize network performance, you need to adjust the TCP6 parameters.
Pre-configuration Tasks
Before configuring TCP6, complete the following tasks:
l
l
Data Preparation
To configure TCP6, you need the following data.
No.
1
2
3

9.5.2 Configuring TCP6 Timers

By setting two TCP6 timers, you can control the TCP connection time.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
tcp ipv6 timer syn-timeout timer-value
The TCP6 SYN-WAIT timer is set.
Issue 01 (2012-03-15)
Connecting and configuring the physical features for the interface and ensuring that the
status of the physical layer of the interface is Up
Configuring the link layer protocol parameters for the interface and ensuring that the status
of the link layer protocol on the interface is Up
Data
Value of TCP6 FIN-WAIT timer
Value of TCP6 SYN-WAIT timer
Size of TCP6 Sliding Window
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Basic Configurations of IPv6
163