S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Figure 2-3 Networking diagram for configuring ARP
Router
PC1
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Create a VLAN and add an interface to the VLAN.
# Create VLAN 2 and VLAN 3.
Issue 01 (2012-03-15)
Server
Internet
GE1/0/2
Switch
GE1/0/1
LSW
PC2
PC2
Create a VLAN and add an interface to the VLAN.
Set dynamic ARP parameters on a VLANIF interface at the user side.
Create a static ARP entry.
GE 1/0/1 added to VLAN 2 and GE 1/0/2 added to VLAN 3
VLANIF 2 with the IP address being 2.2.2.2 and subnet mask being 255.255.255.0, aging
time of ARP entries being 60s, and number of detection times being 2
LSW with the IP address being 2.2.2.1 and subnet mask being 255.255.255.0
Interface connecting the router and the Switch, with the IP address being 10.2.2.3, subnet
mask being 255.255.255.0, and MAC address being 00e0-fc01-0000
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 ARP Configuration
33