Huawei S9300 Configuration Manual page 244

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Configuration Files
l
l
Issue 01 (2012-03-15)
5 minutes input rate 10 bits/sec, 0 packets/sec
5 minutes output rate 14 bits/sec, 0 packets/sec
493 packets input,
0 input error
447 packets output,
0 output error
View the IPv4 routing table on Switch B and Switch D. You can find that the routing
outbound interface directing at the remote end of the IPv4 network is a tunnel interface.
[SwitchB] display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 9
Destination/Mask Proto
1.1.1.1/32 Direct 0
10.1.1.0/30 Direct 0
10.1.1.1/32 Direct 0
10.1.2.0/30 Direct 0
10.1.2.1/32 Direct 0
10.1.2.2/32 Direct 0
127.0.0.0/8 Direct 0
127.0.0.1/32 Direct 0
# On Switch A, ping the IPv4 address of VLANIF 200 of Switch E. Switch A can receive
the response packet from Switch E.
[SwitchA] ping 10.1.3.2
PING 10.1.3.2: 56
Reply from 10.1.3.2: bytes=56 Sequence=1 ttl=254 time=20 ms
Reply from 10.1.3.2: bytes=56 Sequence=2 ttl=254 time=1 ms
Reply from 10.1.3.2: bytes=56 Sequence=3 ttl=254 time=1 ms
Reply from 10.1.3.2: bytes=56 Sequence=4 ttl=254 time=1 ms
Reply from 10.1.3.2: bytes=56 Sequence=5 ttl=254 time=1 ms
--- 10.1.3.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/4/20 ms
Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 100
#
interface Vlanif100
ip address 10.1.2.2 255.255.255.252
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
ip route-static 10.1.3.2 255.255.255.252 vlanif 100 10.1.2.1
#
ospf 1
area 0.0.0.0
network 10.1.2.0 0.0.0.3
#
return
Configuration file of Switch B
#
sysname SwitchB
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
38480 bytes
53144 bytes
Routes : 9
Pre Cost
0
0
0
0
0
0
0
0
data bytes, press CTRL_C to break
12 IPv4 over IPv6 Tunnel Configuration
Flags NextHop
D 127.0.0.1
D 10.1.1.1 Tunnel2/0/0
D 127.0.0.1
D 10.1.2.1
D 127.0.0.1
D 10.1.2.2
D 127.0.0.1
D 127.0.0.1
Interface
InLoopBack0
InLoopBack0
Vlanif100
InLoopBack0
Vlanif100
InLoopBack0
InLoopBack0
233