Dns Configuration - Huawei S9300 Configuration Manual

Terabit routing switch
Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
About This Chapter
By configuring the Domain Name System (DNS), you can enable network devices to
communicate with other through their domain names.
8.1 Introduction to DNS
After each host on the Internet is assigned a domain name, you can set up a mapping between
the domain name and IP address of a host through. In this manner, you can use domain names,
which are easy to memorize and are of significance, instead of complicated IP addresses.
8.2 DNS Supported by the S9300&S9300E
Domain name resolution can be performed in either dynamic mode or static mode.
8.3 Configuring DNS
By configuring the DNS, you can set up a mapping between a domain name and an IP address.
In this manner, you can enable the device to communicate with other devices.
8.4 Maintaining DNS
The operations of DNS maintenance include clearing DNS statistics and monitoring the DNS
operating status.
8.5 Configuration Examples
This section provides a configuration example of DNS.
Issue 01 (2012-03-15)
8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

DNS Configuration

8 DNS Configuration
140

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents