Maintaining Ipv6; Clearing Ipv6 Statistics; Monitoring The Running Status Of Ipv6 - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
LA = ::->22, FA = ::->0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_REUSEPORT SO_SENDVPNID,
socket state = SS_PRIV SS_ASYNC
Task = VTYD(14), socketid = 3, Proto = 6,
LA = ::->23, FA = ::->0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_REUSEPORT SO_SENDVPNID,
socket state = SS_PRIV SS_ASYNC
SOCK_DGRAM:
SOCK_RAW:

9.6 Maintaining IPv6

This section describes how to maintain IPv6. Detailed operations include deleting information
about IPv6 operation and monitoring IPv6 operation.

9.6.1 Clearing IPv6 Statistics

Context
Statistics cannot be restored after being cleared. So, confirm the action before you run the
command.
Procedure
l
l
l
l
----End

9.6.2 Monitoring the Running Status of IPv6

Context
In routine maintenance, you can run the following commands in any view to display the running
of IPv6.
Procedure
l
Issue 01 (2012-03-15)
CAUTION
To clear statistics about processing IPv6 packets, run the reset ipv6 statistics command in
the user view.
To clear the IPv6 neighbor cache entry, run the reset ipv6 neighbors { all | dynamic |
static | vid vlan-id [ interface-type interface-number] | interface-type interface-number }
command in the user view.
To clear statistics about TCP6, run the reset tcp ipv6 statistics command in the user view.
To clear statistics about UDP6, run the reset udp ipv6 statistics command in the user view.
Run the display ipv6 interface [ interface-type interface-number | brief ] command in any
view to view information about IPv6 on an interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Basic Configurations of IPv6
166