Huawei S9300 Configuration Manual page 55

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
IP ADDRESS
----------------------------------------------------------------------------
10.1.1.2
Vlanif100
10.1.1.3
------------------------------------------------------------------------------
Total:2
[Quidway-GigabitEthernet1/0/1] display arp all
IP ADDRESS
----------------------------------------------------------------------------
10.1.1.2
Vlanif100
10.1.1.3
----------------------------------------------------------------------------
Total:2
----End
Configuration Files
Configuration file of the Switch
#
sysname Quidway
#
L2-topolgy detect enable
#
vlan 100
#
interface Vlanif100
ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/1
port link-type access
port default vlan 100
#
interface GigabitEthernet1/0/2
port link-type access
port default vlan 100
#
return
Issue 01 (2012-03-15)
MAC ADDRESS
00e0-c01a-4900
00e0-de24-bf04
Dynamic:1
NOTE
According to the displayed information, the ARP entry learned from GE 1/0/1 is deleted after GE 1/0/1 is
shut down. The aging time of ARP entries learned from GE 1/0/2 becomes 0 after GE1/0/1 is restored and
becomes Up again. When the aging time is 0, the Switch sends an ARP probe packet for updating ARP
entries.
MAC ADDRESS
00e0-c01a-4900
00e0-de24-bf04
Dynamic:1
NOTE
After the ARP entry is updated, the aging time is restored to the default value, 20 minutes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EXPIRE(M) TYPE
VLAN/CEVLAN
I -
0 D-0
Static:0 Interface:1
EXPIRE(M) TYPE
VLAN/CEVLAN
I -
20 D-0
Static:0 Interface:1
2 ARP Configuration
INTERFACE VPN-INSTANCE
GE1/0/2
INTERFACE VPN-INSTANCE
GE1/0/2
44