Ipv6 Dns Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
About This Chapter
By configuring the IPv6 Domain Name System (DNS), you can enable network devices to
communicate with other through their domain names.
10.1 Introduction to IPv6 DNS
After each host on the Internet is assigned a domain name, you can set up mapping between the
domain name and IP address of a host. In this manner, you can use domain names, which are
easy to memorize and are of significance, instead of complicated IP addresses.
10.2 IPv6 DNS Supported by the S9300&S9300E
IPv6 domain name resolution can be performed in either dynamic mode or static mode.
10.3 Configuring IPv6 DNS
By configuring the IPv6 DNS, you can set up a mapping between a domain name and an IPv6
address. In this manner, you can enable the device to communicate with other devices.
10.4 Maintaining IPv6 DNS
This section describes how to maintain the IPv6 DNS. Detailed operations include deleting IPv6
DNS entries and monitoring IPv6 DNS operation.
10.5 Configuration Examples
This section provides several configuration examples of IPv6 DNS.
Issue 01 (2012-03-15)
10

IPv6 DNS Configuration

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 IPv6 DNS Configuration
172