Huawei S9300 Configuration Manual page 136

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Assign IP addresses to VLANIF interfaces.
# Configure Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan 10
[SwitchA-Vlan10] quit
[SwitchA] interface gigabitethernet 1/0/0
[SwitchA-GigabitEthernet1/0/0] port hybrid tagged vlan 10
[SwitchA-GigabitEthernet1/0/0] quit
[SwitchA] interface vlanif 10
[SwitchA-Vlanif10] ip address 1.1.1.1 24
[SwitchA-Vlanif10] quit
# Configure Switch B.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] vlan 10
[SwitchB-Vlan10] quit
[SwitchB] interface gigabitethernet 1/0/0
[SwitchB-GigabitEthernet1/0/0] port hybrid tagged vlan 10
[SwitchB-GigabitEthernet1/0/0] quit
[SwitchB] interface vlanif 10
[SwitchB-Vlanif10] ip address 1.1.1.2 24
[SwitchB-Vlanif10] quit
# Configure Switch C.
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] vlan 10
[SwitchC-Vlan10] quit
[SwitchC] interface gigabitethernet 1/0/0
[SwitchC-GigabitEthernet1/0/0] port hybrid tagged vlan 10
[SwitchC-GigabitEthernet1/0/0] quit
[SwitchC] interface vlanif 10
[SwitchC-Vlanif10] ip address 2.2.2.2 24
[SwitchC-Vlanif10] quit
Step 2 Configure static routes.
# Configure Switch A.
[SwitchA] ip route-static 2.2.2.0 255.255.255.0 1.1.1.2
# Configure Switch B.
[SwitchB] ip route-static 2.2.2.0 255.255.255.0 1.1.1.1
Step 3 Disable the sending of ICMP redirection packets on VLANIF 10 of Switch B.
[SwitchB] interface vlanif 10
[SwitchB-Vlanif10] undo icmp redirect send
Issue 01 (2012-03-15)
Disable the sending of ICMP redirection packets on an interface.
Static routes to indirectly connected devices
IP address of the interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 IP Performance Configuration
125