Checking The Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dns resolve
Dynamic domain name resolution is enabled.
Step 3 Run:
dns server ip-address
A DNS server is specified.
Step 4 (Optional) Run:
dns server source-ip source-ip-address
The IP address of the local device is specified.
The local device uses the specified IP address to communicate with the DNS server, which
ensures communication security.
Step 5 Run:
dns domain domain-name
The suffix of the domain name is added.
----End
Follow-up Procedure
The system supports the configuration of a maximum of 6 domain name servers, 1 source
address, and 10 domain name suffixes.
To configure more than one domain name server, repeat Step 3.
To configure more than one domain name suffix, repeat Step 5.

8.3.4 Checking the Configuration

You can view the configuration of the DNS.
Prerequisites
The configurations of the DNS function are complete.
Procedure
l
l
l
Issue 01 (2012-03-15)
Run the display ip host command to check the information about the static DNS entry
table.
Run the display dns server command to check the configurations about DNS servers.
Run the display dns domain command to check the configurations about domain name
suffixes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 DNS Configuration
143