Huawei S9300 Configuration Manual page 180

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] ipv6
Step 2 Configure the IPv6 global unicast address for the interfaces.
# Configure Switch A.
[SwitchA] vlan 100
[SwitchA-vlan100] quit
[SwitchA] interface gigabitethernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] port hybrid pvid vlan 100
[SwitchA-GigabitEthernet1/0/1] port hybrid untagged vlan 100
[SwitchA-GigabitEthernet1/0/1] quit
[SwitchA] interface vlanif 100
[SwitchA-Vlanif100] ipv6 enable
[SwitchA-Vlanif100] ipv6 address 3001::1/64
[SwitchA-Vlanif100] quit
# Configure Switch B.
[SwitchB] vlan 100
[SwitchB-vlan100] quit
[SwitchB] interface gigabitethernet 1/0/1
[SwitchB-GigabitEthernet1/0/1] port hybrid pvid vlan 100
[SwitchB-GigabitEthernet1/0/1] port hybrid untagged vlan 100
[SwitchB-GigabitEthernet1/0/1] quit
[SwitchB] interface vlanif 100
[SwitchB-Vlanif100] ipv6 enable
[SwitchB-Vlanif100] ipv6 address 3001::2/64
[SwitchB-Vlanif100] quit
Step 3 Verify the configuration.
If the configuration succeeds, you can view the configured global unicast addresses. The status
of the interface and the IPv6 protocol are Up.
# Display information about the interface on Switch A.
[SwitchA] display ipv6 interface vlanif 100
Vlanif100 current state : UP
IPv6 protocol current state : UP
IPv6 is enabled, link-local address is FE80::218:20FF:FE00:83
Global unicast address(es):
Joined group address(es):
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
# Display information about the interface on Switch B.
[SwitchB] display ipv6 interface vlanif 100
Vlanif100 current state : UP
IPv6 protocol current state : UP
IPv6 is enabled, link-local address is FE80::2E0:FCFF:FE33:11
Global unicast address(es):
Joined group address(es):
Issue 01 (2012-03-15)
3001::1, subnet is 3001::/64
FF02::1:FF00:1
FF02::1:FF00:83
FF02::2
FF02::1
3001::2, subnet is 3001::/64
FF02::1:FF00:2
FF02::1:FF33:11
FF02::2
FF02::1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Basic Configurations of IPv6
169