Optional) Configuring The Customized Dhcp Option For The Global Address Pool - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
l
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip pool ip-pool-name
The IP address pool view is displayed.
Step 3 Run:
nbns-list ip-address &<1-8>
The NetBIOS server address of the DHCP server is configured.
Each IP address pool can be configured with up to eight NetBIOS server addresses.
Step 4 Run:
netbios-type { b-node | h-node | m-node | p-node }
The NetBIOS type is set for DHCP clients.
By default, the NetBIOS node type is not specified for DHCP clients.
----End
3.3.6 (Optional) Configuring the Customized DHCP Option for the
Global Address Pool
DHCP provides various options. To use these options, add them to the attribute list of the DHCP
server manually.
Context
When a DHCP client requests an IP address from the DHCP server, the server returns a DHCP
Reply packet containing the option field.
Perform the following steps on the DHCP server.
Issue 01 (2012-03-15)
h-node: indicates a node in hybrid mode, that is, a b-type node enabled with the end-to-end
communication mechanism.
NOTE
The option command configures basic functions, such as the DNS service, NetBIOS service, and IP address
lease. The system also provides commands to configure these functions separately. These commands take
precedence over the option command. If no configuration command of these functions is run, the related
options configured by using the option command take effect.
Related commands:
l DNS service: domain-name and dns-list
l NetBIOS service: nbns-list and netbios-type
l Lease: lease
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 DHCP Configuration
54