Huawei S9300 Configuration Manual page 137

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
[SwitchB-Vlanif10] quit
Step 4 Verify the configuration.
# Debug ICMP packets on Switch B.
<SwitchB> debugging ip icmp
# Run the ping command on Switch A. You can view that Switch B does not send host redirection
packets. No ICMP redirection packet is displayed in the output of the debugging command.
[SwitchA] ping 2.2.2.2
PING 2.2.2.2: 56
--- 2.2.2.2 ping statistics ---
----End
Configuration Files
l
l
l
Issue 01 (2012-03-15)
data bytes, press CTRL_C to break
Reply from 2.2.2.2: bytes=56 Sequence=1 ttl=255 time=3 ms
Reply from 2.2.2.2: bytes=56 Sequence=2 ttl=255 time=3 ms
Reply from 2.2.2.2: bytes=56 Sequence=3 ttl=255 time=3 ms
Reply from 2.2.2.2: bytes=56 Sequence=4 ttl=255 time=3 ms
Reply from 2.2.2.2: bytes=56 Sequence=5 ttl=255 time=3 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 10
#
interface vlanif 10
ip address 1.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 10
#
ip route-static 2.2.2.0 255.255.255.0 1.1.1.2
#
return
Configuration file of Switch B
#
sysname SwitchB
#
vlan batch 10
#
interface vlanif 10
ip address 1.1.1.2 255.255.255.0
undo icmp redirect send
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 10
#
ip route-static 2.2.2.0 255.255.255.0 1.1.1.1
#
return
Configuration file of Switch C
#
sysname SwitchC
#
vlan batch 10
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 IP Performance Configuration
126