Enabling Ra Message Advertising; Setting The Interval For Advertising Ra Messages - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Static neighbors can be configured for VLANIF interfaces. You can configure up to 300
neighbors on each interface.
----End

9.4.3 Enabling RA Message Advertising

After being enabled with switch advertisement, the device can send router advertisement
messages, providing prefixes for hosts.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface vlanif vlan-id
The VLANIF interface view is displayed.
Step 3 Run:
ipv6 enable
You can enable the IPv6 capability.
Step 4 Run:
(Optional)undo ipv6 nd ra halt
The function of advertising RA messages is enabled.
----End

9.4.4 Setting the Interval for Advertising RA Messages

The device periodically sends router advertisement messages containing information such as
prefixes and flag bits.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface vlanif vlan-id
The VLANIF interface view is displayed.
Step 3 Run:
ipv6 enable
You can enable the IPv6 capability.
Step 4 Run:
ipv6 nd ra { max-interval maximum-interval | min-interval minimum-interval }
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Basic Configurations of IPv6
158