Huawei S9300 Configuration Manual page 54

Terabit routing switch
Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Create VLAN 100 and add the two GE interfaces of the Switch to VLAN 100 in default mode.
# Create VLANIF 100 and assign an IP addresses to VLANIF 100.
<Quidway> system-view
[Quidway] vlan 100
[Quidway-vlan100] quit
[Quidway] interface vlanif 100
[Quidway-vlanif100] ip address 10.1.1.2 24
[Quidway-vlanif100] quit
# Add the two GE interfaces to VLAN 100 in default mode.
[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] port link-type access
[Quidway-GigabitEthernet1/0/1] port default vlan 100
[Quidway-GigabitEthernet1/0/1] quit
[Quidway] interface gigabitethernet 1/0/2
[Quidway-GigabitEthernet1/0/2] port link-type access
[Quidway-GigabitEthernet1/0/2] port default vlan 100
[Quidway-GigabitEthernet1/0/2] quit
Step 2 # Enable Layer 2 topology detection.
[Quidway] l2-topology detect enable
Step 3 Restart GE 1/0/1 and view changes of the ARP entries and aging time.
# View ARP entries on the Switch. You can find that the Switch has learnt the MAC address of
the PC.
[Quidway] display arp all
IP ADDRESS
INSTANCE
-----------------------------------------------------------------------------
10.1.1.2
10.1.1.1
10.1.1.3
-----------------------------------------------------------------------------
Total:3
# Run the shutdown command and then the undoshutdown command on GE 1/0/1 to view the
aging time of ARP entries.
[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] shutdown
[Quidway-GigabitEthernet1/0/1] undo shutdown
[Quidway-GigabitEthernet1/0/1] display arp all
Issue 01 (2012-03-15)
Add two GE interfaces to VLAN 100 in default mode.
Enable Layer 2 topology detection and view changes of ARP entries.
Types and numbers of the interfaces to be added to a VLAN
IP addresses of the VLANIF interface and the PCs
MAC ADDRESS
00e0-c01a-4900
00e0-c01a-4901
00e0-de24-bf04
Dynamic:2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EXPIRE(M)
TYPE
VLAN/CEVLAN
I -
20
D-0
20
D-0
Static:0
Interface:1
2 ARP Configuration
INTERFACE
VPN-
Vlanif100
GE1/0/1
GE1/0/2
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents