Huawei S9300 Configuration Manual page 87

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
The DHCP server is connected to the access switches of the two equipment rooms, and allocates
IP addresses for the computers by using two interface address pools.
As shown in
the access switches. The two VLANIF interface address pools need to be configured on GE
1/0/1 and GE 1/0/2 of SwitchA.
Figure 3-7 Networking diagram for configuring a DHCP server based on a VLANIF interface
address pool
NetBIOS Server
10.1.1.3/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Issue 01 (2012-03-15)
Figure 3-7, SwitchA functions as the DHCP server, and SwitchB and SwitchC are
DHCP
Client
SwitchB
SwitchC
DHCP DHCP
Client Client
Configure the DHCP server function on SwitchA.
Create VLANIF interfaces and allocate IP addresses to VLANIF interfaces to determine
the address range of address pools.
Enable the VLANIF interface address pools.
Set the address pool attributes, including the DNS server address, NetBIOS server address,
and IP address lease.
IP addresses of the interfaces
DNS server address and NetBIOS server address
Address lease in the address pool
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
DNS Server
10.1.1.2/24
VLANIF10
10.1.1.1/24
GE1/0/1
GE1/0/2
VLANIF11
10.1.2.1/24
DHCP
Client
3 DHCP Configuration
SwitchA
DHCP
Server
76