Configuration Examples; Example For Disabling The Sending Of Icmp Redirection Packets - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
l
----End

6.5 Configuration Examples

This section provides several configuration examples of IP performance.
6.5.1 Example for Disabling the Sending of ICMP Redirection
Packets
This section provides a configuration example of disabling the sending of ICMP redirection
packets.
Networking Requirements
As shown in
and Switch C are required and these devices are connected through their GE interfaces.
Figure 6-1 Networking diagram for disabling the sending of ICMP redirection packets
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Issue 01 (2012-03-15)
Run the debugging rawlink packet [ src-mac src-mac ] [ dest-mac dest-mac ]
[ verbose verbose-number ] or debugging rawlink packet [ task-id task-id ] [ socket-id
socket-id ] [ verbose verbose-number ] command in the user view to debug RAWLINK
packets.
Figure 6-1, to limit the sending of ICMP redirection packets, Switch A, Switch B,
GE1/0/0
VLANIF10
2.2.2.2/24
SwitchC
Assign IP addresses to interfaces on routing devices.
Configure static routes to indirectly connected devices.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SwitchA
GE1/0/0
VLANIF10
1.1.1.1/24
Internet
GE1/0/0
VLANIF10
1.1.1.2/24
6 IP Performance Configuration
SwitchB
124