Maintaining Ipv6 Dns; Clearing Ipv6 Dns Entries - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Procedure
l
l
l
l
----End
Example
Run the display ipv6 host command. If the static IPv6 DNS entries, including the host name
and the IPv6 address, are displayed, it means that the configuration succeeds. For example:
<Quidway> display ipv6 host
Host
RTB
RTA
Run the display dns server command. If the IPv6 addresses of all DNS servers are displayed,
it means that the configuration succeeds. For example:
<Quidway> display dns server
IPv4 Dns Servers :
Domain-server
IPv6 Dns Servers:
Domain-server Ipv6Address
Run the display dns domain command. If the suffixes of the domain names are displayed, it
means that the configuration succeeds. For example:
<Quidway> display dns domain
No
1
2
Run the display dns ipv6 dynamic-host command. If information about the cache of the
dynamic domain name is displayed, it means that the configuration succeeds. For example:
<Quidway> display dns ipv6 dynamic-host
No
1

10.4 Maintaining IPv6 DNS

This section describes how to maintain the IPv6 DNS. Detailed operations include deleting IPv6
DNS entries and monitoring IPv6 DNS operation.

10.4.1 Clearing IPv6 DNS Entries

This section describes IPv6 DNS entry clearance through the reset command.
Issue 01 (2012-03-15)
Run the display ipv6 host command to check the static IPv6 DNS table.
Run the display dns server command to check the configuration of the DNS server.
Run the display dns domain command to check the configuration of the suffix list of the
domain name.
Run the display dns ipv6 dynamic-host command to check the cache of the dynamic
domain name.
Age
0
0
IpAddress
1 169.254.65.125
1 3001::2
2 FE80::2
Domain-name
com
net
Domain-name Ipv6address
huawei6 3001::2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Flags IPv6Address (es)
static 20::1
static 20::2
(Interface Name)
GigabitEthernet6/0/0
TTL
6
10 IPv6 DNS Configuration
176