Show Errdisable Detect - Cisco Catalyst 3750-X Command Reference Manual

show errdisable detect

show errdisable detect
Use the show errdisable detect user EXEC command to display error-disabled detection status.
Syntax Description
This command has no arguments or keywords.
Command Modes
User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
A displayed
The error-disable reasons in the command output are listed in alphabetical order. The mode column
shows how error disable is configured for each feature.
You can configure error-disabled detection in these modes:
•
•
•
Examples This is an example of output from the show errdisable detect command:
Switch> show errdisable detect
ErrDisable Reason
-----------------
arp-inspection
bpduguard
channel-misconfig
community-limit
dhcp-rate-limit
dtp-flap
gbic-invalid
inline-power
invalid-policy
l2ptguard
link-flap
loopback
lsgroup
pagp-flap
psecure-violation
security-violatio
sfp-config-mismat
storm-control
udld
vmps
Catalyst 3750-X and 3560-X Switch Command Reference
2-632
show errdisable detect
Modification
This command was introduced.
error reason refers to an invalid small form-factor pluggable (SFP) module.
gbic-invalid
port mode—The entire physical port is error disabled if a violation occurs.
vlan mode—The VLAN is error disabled if a violation occurs.
port/vlan mode—The entire physical port is error disabled on some ports and per-VLAN error
disabled on other ports.
Detection
---------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Mode
----
port
vlan
port
port
port
port
port
port
port
port
port
port
port
port
port/vlan
port
port
port
port
port
OL-29704-01