Show Errdisable Recovery - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

show errdisable recovery

Use the show errdisable recovery user EXEC command to display the error-disable recovery timer
information.
Syntax Description | begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(6)EA2
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show errdisable recovery command:
Switch> show errdisable recovery
ErrDisable Reason
-----------------
udld
bpduguard
security-violatio
channel-misconfig
vmps
pagp-flap
dtp-flap
link-flap
gbic-invalid
psecure-violation
gbic-invalid
dhcp-rate-limit
unicast-flood
loopback
Timer interval:300 seconds
Interfaces that will be enabled at the next timeout:
Interface
---------
Gi0/1
0L-10102-01
show errdisable recovery [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Timer Status
--------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Errdisable reason
-----------------
link-flap
Time left(sec)
--------------
279
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show errdisable recovery
2-327