Show Errdisable Recovery - Cisco Catalyst 3550 Command Reference Manual

show errdisable recovery

show errdisable recovery
Use the show errdisable recovery user EXEC command to display the error-disable recovery timer
information.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show errdisable recovery command:
Switch> show errdisable recovery
ErrDisable Reason
-----------------
udld
bpduguard
channel-misconfig
pagp-flap
dtp-flap
link-flap
l2ptguard
psecure-violation
gbic-invalid
Timer interval:300 seconds
Interfaces that will be enabled at the next timeout:
Interface
---------
Gi0/4
Catalyst 3550 Multilayer Switch Command Reference
2-260
show errdisable recovery [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Timer Status
--------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Errdisable reason
-----------------
link-flap
Time left(sec)
--------------
279
Chapter 2 Cisco IOS Commands
78-11195-09