Figure 9 Accessing the CLI through the console port without authentication
Configuring password authentication for console login
Step
1.
Enter system view.
Enter console user interface
2.
view.
3.
Enable password
authentication.
4.
Set a password.
5.
Configure common settings
for console login.
The next time you attempt to log in through the console port, you must provide the configured login
password, as shown in
Figure 10 Password authentication interface for console login
Configuring scheme authentication for console login
Follow these guidelines when you configure scheme authentication for console login:
Command
system-view
user-interface console first-number
[ last-number ]
authentication-mode password
set authentication password
{ cipher | simple } password
See
"Configuring common console
user interface settings
Figure
10.
28
Remarks
N/A
N/A
By default, you can log in to the
device through the console port
without authentication and have
user privilege level 3 after login.
By default, no password is set.
Optional.
(optional)."