Enabling The Stelnet Server; Enabling The Sftp Server; Enabling The Scp Server - HP MSR Series Configuration Manual

Configuration procedure
To generate local DSA or RSA key pairs on the SSH server:
Step
1. Enter system view.
2. Generate local DSA or RSA
key pairs.

Enabling the Stelnet server

After you enable the Stelnet server on the device, a client can log in to the device through Stelnet.
To enable the Stelnet server:
Step
1. Enter system view.
2. Enable the Stelnet server.

Enabling the SFTP server

After you enable the SFTP server on the device, a client can log in to the device through SFTP.
When acting as an SFTP server, the device does not support SFTP connections initiated by SSH1
clients.
To enable the SFTP server:
Step
1. Enter system view.
2. Enable the SFTP server.

Enabling the SCP server

After you enable the SCP server on the device, a client can log in to the device through SCP.
When acting as an SCP server, the device does not support SCP connections initiated by SSH1
clients.
To enable the SCP server:
Step
1. Enter system view.
2. Enable the SCP server.
Command
system-view
public-key local create { dsa |
rsa }
Command
system-view
ssh server enable
Command
system-view
sftp server enable
Command
system-view
scp server enable
395
Remarks
N/A
By default, no DSA or RSA key
pairs exist on the server.
Remarks
N/A
By default, the Stelnet server is
disabled.
Remarks
N/A
By default, the SFTP server is
disabled.
Remarks
N/A
By default, the SCP server is
disabled.