Table of Contents
Advertisement
Table 35 Output description
Field
security data flow
Interface
Protocol
sequence number
mode
tunnel local address
tunnel remote address
proposal name
inbound/outbound AH/ESP setting
display ipsec proposal
Syntax
display ipsec proposal [ proposal-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
proposal-name: Name of a proposal, a string of 1 to 15 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipsec proposal command to display information about IPsec proposals.
Related commands: ipsec proposal.
Examples
# Display information about all IPsec proposals.
Description
ACL referenced by the IPsec policy
Interface to which the IPsec policy is applied.
Name of the protocol to which the IPsec policy is applied. (This
field is not displayed when the IPsec policy is not applied to any
routing protocol.)
Sequence number of the IPsec policy.
Negotiation mode of the IPsec policy, which can be:
manual: Manual mode
Local IP address of the tunnel
Remote IP address of the tunnel
Proposal referenced by the IPsec policy
AH/ESP settings in the inbound/outbound direction, including
the SPI and keys
246
Advertisement
Table of Contents
