Set Authentication Password - HP A8800 Series Fundamentals Command Reference

+ 9
10
Following are more details.
VTY 0
VTY 1
+
F
// The output shows that you are using VTY 0 and another user is using VTY 1.
2. Send a notification to the user of VTY1.
<Sysname> send vty 1
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
Note please, I will reboot the system in 3 minutes!^Z
Send message? [Y/N]:y
<Sysname>
The message should appear on the screen of the user's configuration terminal. The following example
assumes that the user was entering the interface gigabitethernet command when the message arrived:
[Sysname] interface Giga
***
***
***Message from vty0 to vty1
***
Note please, I will reboot the system in 3 minutes!

set authentication password

Syntax
set authentication password [ hash ] { cipher | simple } password
undo set authentication password
View
User interface view
Default level
3: Manage level
Parameters
hash: Enables hash-based encryption.
{ cipher | simple } password: Specifies a case-sensitive password string. The password length and form
requirements vary with the keyword combinations (see
VTY 0 00:00:00 TEL
VTY 1 00:00:03 TEL
:
Location: 192.168.1.26
:
Location: 192.168.1.20
: Current operation user.
: Current operation user work in async mode.
3
3
Table
38
6).