Aggregate-Label - Dell PowerConnect J-EX4200-24T Software Manual

Required Privilege
Level
Related
Documentation

aggregate-label

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
default —For the default route to the destination. This is equivalent to specifying an IP
address of 0.0.0.0/0 .
destination-prefix/prefix-length
address, and prefix-length
The policy statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Aggregate Routes
aggregate-label {
community community-name;
}
[edit logical-systems logical-system-name protocols bgp family inet labeled-unicast],
[edit logical-systems logical-system-name protocols bgp family inet-vpn labeled-unicast],
[edit protocols bgp family inet labeled-unicast],
[edit protocols bgp family inet-vpn labeled-unicast],
[edit protocols bgp family inet6 labeled-unicast]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Enable aggregate labels for VPN traffic.
community community-name
aggregate label.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Aggregate Labels for VPNs
Chapter 73: Configuration Statements for Layer 3 Protocols
— destination-prefix is the network portion of the IP
is the destination prefix length.
—Specify the name of the community to which to apply the
1471