Show Ipv6 Mroute Source - Dell N1100-ON Reference Manual

* FF43::5
2001::5 FF43::5
console#show ipv6 mroute group FF43::5 summary
Source IP Group IP
--------------- --------------- -------- --------- --------- ------
* FF43::5
2001::5 FF43::5

show ipv6 mroute source

Use the show ipv6 mroute source command to display the multicast
configuration settings such as flags, timer settings, incoming and outgoing
interfaces, RPF neighboring routers, and expiration times of all the entries in
the multicast mroute table containing the sourceipaddr or sourceipaddr |
groupipaddr pair value(s).
Syntax
show ipv6 mroute source sourceipaddr {summary | groupipaddr}
• sourceipaddr — IP address of source.
• groupipaddr — IP address of multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 mroute source 2001::5 ?
00:00
02:54
Multicast Route Table Summary
Protocol IIF
PIMSM
PIMSM
00:01:00 ::
00:00:35 2001::5
OIF
Vl11
Vl13
Vl12 Vl11
Vl13
Layer 3 Routing Commands
RPT
SPT
Expiry
1615