Show Ip Multicast - Dell N1100-ON Reference Manual

Field
MFC IPv4 Mode
MFC IPv6 Mode
MFC Entry Count
Total Pkts Forwarded in
SW
Source Address
Group Address
Protocol
Pkts Forwarded in SW Number of multicast packets that are forwarded in software
Example
console#show ip mfc
MFC IPv4 Mode.................................. Disabled
MFC IPv6 Mode.................................. Disabled
MFC Entry Count................................ 0
Current multicast IPv4 protocol................ PIMSM
Current multicast IPv6 protocol................ No protocol enabled.
Total software forwarded packets............... 0
-------------------- -------------------- ---------- --------------
Source Address
Forwarded in SW
-------------------- -------------------- ---------- --------------
192.168.28.4

show ip multicast

Use the show ip multicast command to display the system-wide multicast
information.
Syntax
show ip multicast
Default Configuration
This command has no default configuration.
Description
Enabled when IPv4 Multicast routing is operational.
Enabled when IPv6 Multicast routing is operational.
The number of entries present in MFC.
Total Number of multicast packets forwarded in software.
Source address of the multicast route entry.
Group address of the multicast route entry.
The current operating multicast routing protocol.
for a specific multicast route entry.
Group Address
232.1.2.3
Protocol Pkts
PIM-SM 61
Layer 3 Routing Commands
1584