Chapter 9 Appendix; Specifications (Cutting) - MIMAKI JV330 Series Operation Manual

Chapter 9 Appendix

9.1 Specifications
Item
Print Type On-demand piezo head
head
Specificatio Two staggered heads with 400 nozzles × 8 rows each
ns
Resolution Y: 600 dpi, 800 dpi, 1,200 dpi
X: 600 dpi, 900 dpi, 1,200 dpi
Ink set 4-color C, M, Y, K (UISS functions on all)
6-color, W C, M, Y, K, Lc, Lm, W
8-color C, M, Y, K, Lc, Lm, Lk, Or
6-color -
7-color -
4-color, -
fluorescent
6-color, -
fluorescent
Media Type Label paper (paper base), PVC sheet (not more than
0.25 mm in thickness, including laminating layer),
fluorescent sheet, reflective sheet, window film,
tarpaulin
Maximum 130 size: 1,360 mm
printing
160 size: 1,610 mm
*1
width
Maximum 130 size: 1,370 mm
width
160 size: 1,620 mm
Minimum 210 mm
width
Thickness Max. 1.0 mm
Roll Feed unit: Max. 250 mm (paper media), max. 210 mm
external (other media)
*2
Take-up unit: Max. 250 mm (paper media), max. 210
diameter
mm (other media)
Roll One roll: Max. 45 kg
*2, 3
Three rolls: Max. 90 kg (feed unit only)
weight
JV330 Series
• Do not use media with low stiffness like tarpaulin
when using the XY slitter.
CJV330 Series
220
TS330-1600
Y: 300 dpi, 600 dpi
X: 600 dpi, 900 dpi, 1,200
dpi
BL, M, Y, K (UISS
functions on all)
-
-
BL, M, Y, K, Lbl, Lm (UISS
functions only on Y and K)
BL, M, Y, K, Lbl, Lm, Lk
(UISS functions only on Y)
BL, M, Y, K, FP, FY (UISS
functions only on BL and
M)
BL, M, Y, K, Lbl, Lm, FP,
FY
Transfer paper
1,610 mm
1,620 mm
Feed unit: Max. 250 mm
Take-up unit: Max. 250
mm
• 120 to 200 mm when
the edge guide is
attached (depending
on the position of the
edge guide)
Max. 45 kg