Chapter 1 Before Use
Installing the machine
Where to install the machine
Secure sufficient space for installation before assembling
this machine.
Decide the place considering the size of the machine and
a space required for printing.
Model
Width
UJF-7151
2,198 mm
1,572mm
plus
(86.5 in)
(61.9 in)
UJF-7151
2,203 mm
1,572mm
plusII
(86.7 in)
(61.9 in)
300 mm
or more
(11.8 in or
more)
2,800 mm or more
(110.2 in or more)
Moving this machine
Move this machine as follows when this machine is
required to move on the step-free same floor.
• When moving this machine, take care not to give a
significant impact on it.
• When moving this machine, keep it as flatly as
possible. Do not move it on its side. It may cause
machine failure.
• The dedicated stand of this machine includes
leveling feet to secure the machine.
Before turning the power ON, make sure that the
printer body is fixed with the leveling feet.
The printer body may start moving during
operation if it is not fixed with the leveling feet.
1-2
Total
Depth
Height
Weight
1,273mm
(50.1 in)
Approx.320 kg
(Including
(705.5 lb)
dedicated stand)
1,293mm
(50.9 in)
Approx.330 kg
(Including
(727.5 lb)
dedicated stand)
500 mm or more
(19.7 in or more)
300 mm
(11.8 in)
300 mm
or more
(11.8 in
or more)
500 mm or more
(19.7 in or more)
Before moving this machine, install the
handles for transporting. (two places)
Insert the handles into this machine, and fix them
tightening screws.
Handles for
transporting
For safety, be sure to work it with more than 11
people.
Do not push the cover to move this machine since the
cover may be deformed. Be sure to hold the handles
for transporting when moving the machine.