Replacing Consumables; Replacing The Wiper - MIMAKI Tx300P-1800 Operation Manual

Chapter 4 Maintenance

Replacing consumables

Use the supply items to replace filters and parts if they are
excessively dirty, damaged, or deformed.
品名
Dye Sublimation Ink:
Sb420
Dye Sublimation Ink:
Sb421
Disperse Dye Ink: Dd400
Acid Dye Ink: Ac400
Reactive Dye Ink: Rc400
Reactive Dye Ink: Rc500
Washing liquid
(Maintenance kit )
Hybrid：
Sb411+Sb420
Pigment ink :TP400
Hybrid：
Sb420+TP400
Sb421+TP400
Sb411+TP400
Clean stick for the surroundings of the head
50 pcs
Techno wipe for the surroundings of the head SPC-0855
CP PAD SET (Cap Pad)
CAP ABSORBER KIT
SQUARE WASTE INK TANK 2L
WIPER KIT 300TS
*
Wiper kit 300Tx-II
INK TRAY SPACER
300 FAN FILTER
PR-T (Pinch rollers)
Rubber stopper for 2L case
MEDIA HOLDER Tx
MALE CONNECTOR ABSORBENT FOR
MBIS
*: Tx300P-1800 MkII only, when using the Sb411+TP400 or
Sb411+Sb420 ink sets.

Replacing the wiper

The wiper is consumable. When the display indicates the
warning message "Replace a WIPER" it is necessary to
check and replace the wiper, immediately replace the
wiper with a new one. When cleaning the twin wiper,
follow the procedure below.
Also, wipe ink sticking to the lower surface of the slider off.
The wiper will differ depending on the particular machine
model and ink sets. Replace the wiper as indicated in the
following table.
Model Ink set
Tx300P-
----
1800
Other than the
following
Tx300P-
1800 MkII
Sb411+TP400/
Sb411+Sb420
• Be sure to use the correct wiper corresponding to
the usage conditions. Using the incorrect wiper
may cause nozzle falling off.
4-22
品番
ML003-2-K1
C-ML012-Z-
K1-1-KW
SPC-0527
SPA-0269
SPA-0314
SPA-0246
SPA-0271
*
SPA-0313
SPA-0276
SPC-0774
SPA-0275
SPA-0250
SPA-0278
SPA-0625
Wiper
Product
Product Name
No.
SPA-0271 Wiper kit 300TS
SPA-0271 Wiper kit 300TS
SPA-0313 Wiper kit 300Tx-II
• When the warning message for replacing wiper is
shown, confirm whether there is no damage and
fuzz at the top edge of the wiper film. If there is no
damage on the top edge of the wiper film, it is
possible to use the wiper continuously without
replacing it.
• A cleaning wiper is an option.Buy one through the
dealer in your region or at our service office.
Press (MENU)
1
in LOCAL.
• MAINTENANCE MENU will be displayed.
Press the
2
• "STATION" will be selected.
Press to select "WIPER
3
EXCHANGE", and press the
Press the
4
• The carriage will move onto the platen.
.
Open the front cover.
5
Remove the wiper.
6
• Pull out the wiper by holding the protrusions at its
both ends.
Projection
• For the twin wiper
Projection
Insert a new wiper.
7
• Insert the wiper by holding the protrusions at its
both ends.
key.
key.
key.
Carriage