Huawei NetEngine80E Configuration Manual - Reliability page 1409

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
172.16.5.100
172.16.5.1
200
200
200
s
s
s
NONE
0000-5e00-0101
YES
vrrp
disabled
60
UP
+10:59
Step 7 Bind the HA backup group to the VRRP backup group on CGN1 and CGN2.
# Configure CGN1.
[CGN1] service-location 1
[CGN1-service-location-1] vrrp vrid 1 interface GigabitEthernet 1/1/1
[CGN1-service-location-1] quit
Step 8 Create a service instance group on CGN1 and CGN2 and bind it to the HA backup group.
# Configure CGN1.
[CGN1] service-instance-group 1
[CGN1-service-instance-group-1] service-location 1
[CGN1-service-instance-group-1] quit
Issue 02 (2014-09-30)
Master IP :
PriorityRun :
PriorityConfig :
MasterPriority :
Preempt : YES
Delay Time : 300
TimerRun : 1
TimerConfig : 1
Auth type :
Virtual MAC :
Check TTL :
Config type : admin-
Backup-forward :
Fast-resume : disabled
Track Service-location : 1
Service-location state :
Create time : 2011-10-18 11:14:48 UTC
Last change time : 2011-10-18 14:02:46 UTC+10:59
NOTE
The configuration of CGN2 is the same as that of CGN1. Details for the configuration procedure are not
provided here.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 CGN Backing Up HA Configuration
Priority reduced :
1392

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents