SATO CL4NX Operator's Manual page 96

5. Select [Sensor Type] using the
6. Press the
The [Sensor Type] screen appears.
7. Select the sensor type to detect the print position using the
[None]
Disables the media sensor.
[Gap]
Select this option when using gap type media. Use the transmissive type sensor.
[I-Mark]
Select this option when using I-mark type media. Use the reflective type sensor.
• If you have selected [Tear-Off], [Dispenser], or [Cut & Print] in the [Print Mode] menu,
only [Gap] and [I-Mark] will be available.
• If you have selected [Linerless] in the [Print Mode] menu (CL4NX only), only [None]
and [I-Mark] will be available.
/
button.
buttons.
96
Media Sensor Type
/ buttons.