SATO CL4NX Operator's Manual page 248

[Head Base Position]
Set the position used for the base reference point for printing.
The options are as follows:
Item
[Standard]
[Left-justify]
• A message prompting you to restart the printer will appear on the Online/Offline screen
if you have made any changes. In such a case, reboot the printer to apply the settings.
CL4NX
Print with a standard base
reference point.
Move the base reference point 2
mm (0.08") to the left toward the
printer.
CL6NX
Print with a standard base
reference point.
Expand the width of the printable
area (maximum print width) to 167.5
mm (6.59").
Move the base reference point 2
mm (0.08") to the left toward the
printer.
248
[Advanced]