SATO CL4NX Operator's Manual page 12

Handling the power
cord
When the printer
has been dropped or
broken
Do not use the printer
when something is
abnormal about it
Do not disassemble
the printer
Regarding the cutter
• Do not damage, break, or modify the power cord. Also,do not place
heavy objects on the power cord, heat it, or pull it because doing so
could damage the power cord and cause a fire or electric shock.
• If the power cord becomes damaged (core is exposed, wires broken,
etc.), contact your SATO reseller or technical support center. Using
the power cord in this condition could cause a fire or electric shock.
• Do not modify, excessively bend, twist, or pull the power cord. Using
the power cord in such a condition could cause a fire or electric
shock.
• If the printer is dropped or broken, immediately turn off the power
switch, unplug the power cord from the outlet, and contact your SATO
reseller or technical support center. Using the printer in this condition
could cause a fire or electric shock.
• Continuing to use the printer in the event something is abnormal
about it, such as smoke or unusual smells coming from it, could
result in fire or electric shock. Immediately turn off the power switch,
unplug the power cord from the outlet, and contact your SATO
reseller or technical support center for repairs. It is dangerous for the
customer to try to repair it, so absolutely do not attempt repairs on
your own.
• Do not disassemble or modify the printer. Doing so could result in fire
or electric shock. Ask your SATO reseller or technical support center
to conduct internal inspections, adjustments, and repairs.
• Do not touch the cutter with your hands or do not put something into
the cutter. Doing so could result in an injury.
12
Safety Precautions