Adjusting the Base Reference Point
About the Base Reference Point
The base reference point is the point at which one determines the print position and stop/cut/
dispensing position.
The base reference point differs depending on the operation mode or media sensor you use.
Continuous Mode/Tear-off Mode
I-mark Label
(1) Feed direction
(2) Print and stop position
Cutter Mode
I-mark Label
(1) Feed direction
(2) Print and cut position
Gap Label
(1) Feed direction
(2) Print and stop position
Gap Label
(1) Feed direction
(2) Cut position
(3) Print position
586
About the Base Reference Point