SATO CL4NX Operator's Manual page 595

Cut Position When Using the Media with Perforated Line in Cutter Mode
Adjust the cut position so as not to cut the media on the perforated line and on the area near side from
the perforated line (the area is shown in the figure below).
When the media is cut on the area not to be cut, it could cause a paper jam or damage.
• Media Roll
The area not to be cut is on the perforated line and on the area within 1 mm (0.04") near side
from the perforated line.
(1) Area not to be cut
(2) Perforated line
• Fan-fold Media
The area not to be cut is on the perforated line and on the area within 4 to 25 mm (0.16" to 0.98")
near side from the perforated line.
(1) Area not to be cut
(2) Perforated line
595