SATO CL4NX Operator's Manual page 464

Hide thumbs Also See for CL4NX:

Table of Contents

If you set the [Hex Dump Mode] to [Enabled], the design of the Online/Offline screen

You can save a maximum of 10 received data files for each type of interface.

Depending on the file size, the number of files you can save will be less than 10.

The details of the files created inside "hexdump/" of the printer are as follows:

Received data through Bluetooth.

Received data through LAN.

Received data through IEEE1284.

Received data through NFC.

PIPE00xx.bin

Received data through pipe.

Received data through RS-232C.

Received data through USB.

WIFI00xx.bin

Received data through wireless LAN.

[Buffer Dump]

Save the receive buffer data to the printer.

Available only if you have set to [Disabled] in the [Hex Dump Mode] menu.

Press the [START] button (

Save the receive buffer data to "buff/" in the printer.

button) on the startup screen to save the data to the printer.