SATO CL4NX Operator's Manual page 421

[Format Attribute]
Set the format attribute.
You can change this setting only if you have selected [Settings] in the [Prioritize] > [Format Attribute]
menu.
The options are as follows:
• [XOR]
• [Transparent]
• [Opaque]
• [Inverse]
[Pause Mode]
Enable or disable the pause mode.
You can change this setting only if you have selected [Settings] in the [Prioritize] > [Pause Mode]
menu.
The options are as follows:
Enabled
Enable the pause mode.
421