SATO CL4NX Operator's Manual page 711

Error Message 1010 (Media Error)
When there is an error with the printer, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Open/close the print head, or press the
Cause and Countermeasure
Cause (1)
The media size of the print data and the actual media size are different.
Countermeasure (1)
Check the media size of the print data and the actual media size again.
If the error is not solved, power on the printer again.
Cause (2)
The media size of the print data is longer than the actual media size.
Countermeasure (2)
Check the print data.
If the error is not solved, power on the printer again.
Cause (3)
The media is fed a longer distance due to the incorrect sensor level.
Countermeasure (3)
Adjust the media sensor level.
Calibrate
If the error is not solved, power on the printer again.
Contact your SATO technical support center if the error cannot be resolved.
Contact Information for When You Are in Trouble
button (OFFLINE) or the
711
button.