Cleaning The Optional Linerless Cutter Kit (Cl4Nx Only) - SATO CL4NX Operator's Manual

Hide thumbs Also See for CL4NX:

Table of Contents

8. Clean the media sensor (7) using the cotton cloth dabbed with cleaning liquid.

9. Return the media sensor guide to its original position and tilt the sensor guide lock

up to the locked position.

Cleaning the Optional Linerless Cutter Kit (CL4NX only)

If the optional linerless cutter kit is installed, follow the procedure below to clean the printer:

1. Clean the media guide (1) and inner surface (2) that is in contact to the label edge

using the cotton cloth dabbed with cleaning liquid.

Cleaning the Optional Linerless Cutter Kit (CL4NX only)