List Of Initial Values; [Printing] Menu - SATO CL4NX Operator's Manual

Hide thumbs Also See for CL4NX:

Table of Contents

List of Initial Values

The initial value refers to the setting value of the printer when it was shipped from the factory. If you

reset the printer, the setting values of the printer will change back to the factory default values. The

table below shows the initial value of each setting item and type of reset that changes the value back

to the initial value.

Normally, it is not necessary to perform the initialization. Doing so will remove all the

customer settings.

Setting Item

[Label Length]

[Label Width]

[Auto Measure]

[Ribbon Near End]

Initial Value

If [Head Base

Position] is [Standard]

If [Head Base

Position] is [Left-

[Printing] Menu