SATO CL4NX Operator's Manual page 284

[Key Index]
Set the key index.
Set the key index (WEP key) according to the access point of the wireless LAN you connect.
The setting range is from 1 to 4.
• Depending on the product, the range of the key index may be 0 to 3. In such a case, if
you have set the printer to 1, set the product to 0.
[Key #1] to [Key #4]
Set the WEP key #1 - key #4.
You can enter alphabet (capital and small letters) and numbers.
Depending on the length of the WEP key, the number of characters you can set is as follows:
• When the key length is 64 bits
ASCII: Five characters
Hexadecimal: 10 characters
• When the key length is 128 bits
ASCII: Thirteen characters
Hexadecimal: 26 characters
284
[Network]