SATO CL4NX Operator's Manual page 484

Enabled
If a reading error or comparison error occurs, the printer prints error marks on the label without
pausing.
After VOID printing, the printer prints and checks the same label until it reaches the number of
retries specified in [Retry Count]. If the error still occurs after the specified number of retries are
done, the printer pauses after VOID printing, and shows an error message on the display.
Disabled
If a reading error or comparison error occurs, the printer pauses and shows an error message on
the display.
• Printing of the VOID mark is not supported in dispenser and linerless (CL4NX only)
modes.
[Retry Count]
Set how many times the printer will try to print and check the same barcode after VOID printing when a
barcode reading error or barcode comparison error occurs.
Appears only if you have selected [Enabled] in the [VOID Print] menu.
The setting range is from 0 to 10.
As long as the error continues to occur, the label is reprinted up to the number of times specified in this
setting.
For example, if you set it to 0, if the error occurs while checking the first label, the printer pauses and
shows an error message after VOID printing. If set to 5, if the error continues to occur until the 6th
label, the printer pauses after VOID printing for the 6th label, and shows an error message.
484
[Barcode Checker]