Format ID
IC
SCSC
dcdc...
1
If the optional RTC kit is not installed, the system time will be output.
[Copy]
Copy the barcode check log data to the USB memory.
Available only if there is barcode check log data in the printer and if you have installed the USB
memory.
•
Be sure to perform a virus check on the USB memory before connecting it to the
printer. SATO Corporation shall not be held responsible for any printer malfunctions
caused by a virus spread via USB memory.
Press the
Description
FAILURE
•
•
IGNORED
This means that the data is read during a period other
than from the start to the end of checking, while the printer
is active.
The amount of print data as a check target
*If the check result is "IGNORED", this becomes "--".
Size of print data (bytes)
*If the check result is "IGNORED", this becomes "----".
Print data
*If the check result is "IGNORED", nothing is output.
button to copy the log data to the USB memory.
In readable mode, this means that the barcode checker
could not read the number of printed barcode data.
In comparison mode, this means that the read data and
print data do not match.
487