SATO CL4NX Operator's Manual page 11

Do not set on an
unstable area
Do not place
containers full of water
or other liquid on the
printer
Do not put objects
inside the printer
Do not use other than
the specified voltage
Always ground the
connections
• Do not set on an unstable area, such as a wobbly table or slanted
area or an area subject to strong vibration. If the printer falls off or
topples over, it could injure someone.
• Do not place flower vases, cups, or other containers holding liquids,
such as water or chemicals, or small metal objects near the printer.
If they are spilled and get inside the printer, immediately turn off the
power switch, unplug the power cord from the outlet, and contact
your SATO reseller or technical support center. Using the printer in
this condition could cause a fire or electric shock.
• Do not insert or drop in metal or burnable objects inside the printer's
openings (cable outlets, etc.). If foreign objects do get inside the
printer, immediately turn off the power switch, unplug the power cord
from the outlet, and contact your SATO reseller or technical support
center. Using the printer in this condition could cause a fire or electric
shock.
• Do not use other than the specified voltage. Doing so could result in
fire or electric shock.
• Always connect the printer's ground wire to a ground. Not grounding
the ground wire could result in electric shock.
11