SATO CL4NX Operator's Manual page 256

◦ Appears only if you have selected [DHCP] in the [Mode] menu and LAN is the active interface.
◦ Does not appear if the wireless LAN is the active interface.
IP Address
Set and check the IP address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the IP address you received
from the DHCP server.
If you have selected [Static] in the [Mode] menu, select to set the IP address.
Netmask
Set and check the subnet mask address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the subnet mask address you
received from the DHCP server.
If you have selected [Static] in the [Mode] menu, select to set the subnet mask address.
Gateway
Set and check the default gateway address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the gateway address you
received from the DHCP server.
If you have selected [Static] in the [Mode] menu, select to set the default gateway address.
DNS
Set and check DNS server addresses.
If you have selected [Static] in the [Mode] menu, select to set and check DNS server addresses.
•
After doing the settings, press the
the
• You cannot change [IP Address], [Netmask], [Gateway], or [DNS] if [Mode] is [DHCP].
[Mode]
button to cancel the new settings and return to the previous settings.
256
button to enable the new settings. Press
[Network]