SATO CL4NX Operator's Manual page 384

[Standard Code]
Set the protocol code.
The options are as follows:
Enabled
Use a standard code.
Disabled
Use a non-standard code.
• A message prompting you to restart the printer will appear on the Online/Offline screen
if you have made any changes. In such a case, reboot the printer to apply the settings.
When [AUTO] is selected in the [Protocol] menu while [Disabled] is selected, the
setting will be changed to [Enabled].
[Orientation]
Select the layout for printing the label.
Portrait
Use a portrait layout. (No rotation)
384
[SBPL]